Questions & Answers for: mx5 engine removal

Question about 2002 Miata

1 Answer

MX5 Front Wheel Bearing Hello, I have a Mazda MX5 2002 model and need to change the front wheel bearing. I am a trained engineer but need to know what is needed besides the obvious to replace this. ...

Ad

Question about 1990 MX-5

1 Answer

mx5 floods on starting engine floods on starting whether hot or cold, removing injector electrics and turning her over, then replacing electrics usually works. check fuel pressure regulator, is return

Ad

...mx5 1999 1.6 only running on 2 cylinders Changed plugs, checked coil seems fine, was running but hiccoughed alot but ironed itself out after awhile then just lost power 2 weeks ago so checked the ...

mx5 1993 - HELP NEEDED !!! I have a 1993 Mazda Eunos Roadster, I have recently found a water leak on it. I am definately no mechanic and can only describe the leak coming from the following place.....

mx5. The car was removed from storage for the winter. I washed the engine and left in the rain. 5-6 weeks. Later when I started the engine it backfiring and stall.The problem worse each time I started

...MX5? The bottom bolt can't be removed as it bumps into ''something else'', can this something else be removed? Please help, my wife is going to kill me if I don't fix her motor! Just about every ...

...engine as my MX5 91. You have to remove power steering belt first if you have one. Loosen the mounting bolt located behind the pump pulley, then loosen the tensioner bracket bolts( one on the engine ...

...mx5 1.6i and ust leave the sensor out. Hi! It may be safe to remove the MAF but it's unwise to do so. For the MAF has great contribution on engine performance specially the idling. Hope this ...

Question about 2000 MX-5 Miata

1 Answer

...mx5 interior heater not working Please check on the tubing from the engine and see if there is any corrosion. There is a possibility that rust could block the passage of the hot water ...

1991 mazda miata mx5 1.6L. Can I simply loosen timing belt, and remove the cam(s) with the gears still attached to access the lifters? (for cleaning and/or replacement) That is a tricky question! Some

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...