...the wire cable from the alternator. Loosen the top bolt to the alternator. Remove the adjuster bolt at the bottom of alternator. Remove the top bolt....and wah-la. The alternator comes out with
...alternator, the other is near the bottom. The bottom bolt threads through the end of the ADJUSTMENT bolt (which is at a 90 degree angle to this mounting bolt, and faces threaded end w/ adjustment nut ...
...charge the battery...your alternator is only designed to "maintain" the charge, not bring it up to full power. Good luck, alternators for the MX5 are spendy, so I hope it's one of the other
...bottom left) on the alternator that hold it in place. The one on the bottom left (on the same side as the tension adjusting bolt) is the locking bolt. You will see that there is a track for it to ...
...alternator on an MX5? The bottom bolt can't be removed as it bumps into ''something else'', can this something else be removed? Please help, my wife is going to kill me if I don't fix her motor! Just ...
alternator belt in a mazda mx-3 If your engine are the 1,6 l , it is the same engine as my MX5 91. You have to remove power steering belt first if you have one. Loosen the mounting bolt located behind
...put the belt on the pulley and use the top bolt. You will need to tight the bottom bolt, than pull the alternator with some bar but gentle to get the belt tight, hold it and than tight the top
Question about 1/24 Mazdaspeed MX5 Roadster MX5 Car Model Kit - 03681
my alternator is over charging my battery what will happen your battery will eventually give out,, if you have a reading at the battery posts between 13.5 - 14.5 volts when checked the motor is ...
Question about 1/24 Mazdaspeed MX5 Roadster MX5 Car Model Kit - 03681
...bottom bolt and take out your alternator. There might be other cables and brackets in the way, these have to be removed to allow the alternator to be taken out. Alternately the alternator can be ...
Question about 1/24 Mazdaspeed MX5 Roadster MX5 Car Model Kit - 03681
engine - loosen the lock bolt at the bottom of the alternator, then use the adjustment bolt (perpendicular to the lock bolt) to tighten the belt tension. Once properly tensioned, tighten the lock bolt
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions