Questions & Answers for: mtd mower shift gear

...mtd 18hp 46" cut riding lawn mower with automatic transmission. When I shift into gear it makes a noise and will not move. What could be the problem? Is there a way to check transmission fluid? The ...

...MTD lawn mower model 13am675g062.It looks as if the front drive belt is not turning at the variable speed pulley, all belts are new, i think the belt from the factory is to long. It will move but as ...

I have a 2002 MTD 42'' cut 6 speed but transmission slips in 3rd bad.Is it a belt tensioning thing or more serious sounds like you have a bad 3rd gear and your shifting forks could be bad in trans.

MTD Yardman and it has a problem it is very hard to get in and out of gear. Check the linkage to see if it's free and not stuck in any way. Also, where it's old it may need a couple adjustments on the

...MTD mower tha tis ver jerky in forward, reverse is fine. What could it be? The trans is about 2 years old. I thisnk it could be the clutch plate or the differentital, however, reverse works fine so I ...

...Mower 42" Yard Machines MTD 742RL 17.5HP Ride on Mower 42" runs fine, but has lost reverse. Any idea what the problem might be, and would it be expensive to repair ?? Check the adjustment on the ...

...mower and it goes ino reversean drive but in drive the gear pops out. but ifi hold the shifter in gear it will hold fr a second wha could this be? it might be a broken spring on the shift ...

...mower so hard to shift gears. It is a 12 hp. 6 gear mower about 20 years old. Could it have an object jammed inside the shifting arm or it could actually be bent just enough over the years from wear ...

mower to only accelerate when in 2nd gear or higher and to turn off when switched to reverse? Worn engine to variable speed pulley belt om MTD. If switching off the blades are operating and shift into

MTD RIDING MOWER MODEL 13AH660F372 STUCK IN 2ND GEAR BUT WENT INTO HIGH SPEED Your model is a shift on the go or varidrive. Not a transmission in the true sense . I have had to give the variable ...