Questions & Answers for: mp tray jam

...setting? Menu> scroll to Paperhandling> MP Tray type>>(plain) try changing this to cardstock   instead of MP Tray type do the same for Cassette if you desire.... Best, ...

Ad

Question about FS-1030D Laser Printer

2 Answers

MP tray transport jam and to open front cover. No paper is jammed or in the machine. check the bypass transport connector for a small piece of paper. or the paper sensor arm is jammed down there are 2

Ad

Question about CLP-510 Laser Printer

1 Answer

...of the MP-tray (multi purpose tray). There are two hinges which keep the open MP-tray in a horizontal position. One of this hinges was broken and I just received it. Just try it. regards, ...

Question about C5250n Printer

1 Answer

...mp tray cleaned all rollers and looked for any objects doesent jam all the time though help Unfortunately this may require and engineers visit. If you pull down the MP assembly by using the handle in ...

...the tray is not set to a4 check its on a4 on display this is a common problem as mp feeder is set to a4 so if it does not see tray 1 as a4 will go th mp feeder and as no paper will give 250 ...

Question about MFC-8840D All-In-One Laser Printer

1 Answer

...-) which tray is paper in? the MP tray is the manual bypass tray in front of machine. sounds like your software is setup to utilize the MP tray for the labels, which is the best thing to do. hth ...

Question about MP640 All-In-One InkJet Printer

1 Answer

...Tray 1 Gently open the ... Jam, Check MP Feeder Gently pull the jam straight out of the multipurpose feeder. 202 Paper Jam, Open Rear Door 1 Open the ... side to locate a green lever. Note: To clear ...

Question about FS-2020D ECOSYS Monochrome Laser - 35ppm, USB2.0 & Parallel Interfaces, 500 Sheet p... Printer

1 Answer

Mp Tray i was printing 6 pages earlier today the printer stopped at 5 paper got jammed so i open the back removed the paper jam and now it wont let me print!! keeps telling me load mp tray a4 this has

...MP Tray. There are no papers jambed but it will not reset. Hi James, Remove the paper from the MP tray. Remove any jammed paper from in and around the MP tray. Fan the paper stack, and then put it ...

Question about HL-4040CN Laser Printer

1 Answer

...MP tray 2. Remove any jammed paper from in and around the MP tray 3. Close the MP tray. Then open the front cover and close it to reset the machine. 4. Open the MP tray again 5. Fan the paper stack, ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

k24674

Level 3 Expert

8093 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66967 Answers

Are you an Office Equipment & Supplies Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...