Questions & Answers for: mounting garmin transducer boat

...Garmin 440 on my boat. It works fine as I'm going slowly through a no wake zone (5 knots) but when I accelerate past 2,000 rpm or 15 knots, the readout blinks at the last depth and it appears the ...

...Garmin Gps map 498. It came with my boat and I would like to eliminate the tracks. Also can it give me the speed ? TERRY Here's the link to download the manual for free. If this solves your problem, ...

Transducer with Depth (200 kHz, 12 deg) 010-10107-00 It all depends on the type of boat and how you are going to be using the fishfinder. Here is my email: [email protected] if you want to discuss your

boat out to a lake ( or wherever ' on the water ' ) and mount the transducer to a long dowel or stick and hang it over the edge of the boat and this will work fine for testing. ' fish on and have fun

Sonar is working erratically. Loses bottom and flashes. Anything to do other than replace the transducer? I have a very similar problem.  Unfortunately my boating season is over until next ...

Garmin depth finder/gps combo is giving me a false depth reading,like way way outta sack,not a foot or two. It came as an extra on a boat I purchased and elsewise seems ok,just inaccurate depth. Is it

...transducer mounting location.I installed it acording to instructions. Boat transom rides low in the water and water passes thru mounting bracket.It is reading depth correctly even when up on plane ...

...boat to the other. Now I get message "no transducer". ??? Thank you, Billy Make sure the plug that gives this unit power is secure. Also I think this device has a 2ft branch that goes to the ducer. ...

...transducer mounting (either inside the hull or outside the hull.) 4. (In hull) Turbulence going under the boat (mine quits reading at about 55 mph @ half trim...the boat is lifting so much it causes ...

Can you test a Transducer by homing it. I have a Garmin 541s Place your ear against the transducer with unit ON. You should hear it 'tikking' ( tic tic tic ) then the transducer is ok...