Questions & Answers for: mount scope

...elevation to center or zero position. Remove your scope from the gun and make sure that the scope mounts are aligned, this is critical. Purchase an alignment tool is necessary. Then remount the ...

...scope mount out with a strip of 35mm film,,(the rear being the end you look throw),you only need to life the rear end of your scope 25th of an inch to rise its point of impact by 6" inchs at 100 yds ...

...of the scope if they are on opposite sides of the mount. The other problem may be poorly drilled mounting holes on the receiver or scope mount, check these for alignment with your bore or

I bouht a ncstar scope mount I cant figeur out on how to mount it. Is it for a plain jane mini-14 or a Ranch Rifle. the mount and mounting process is different.

scope mount undo the rear scope mount cap (eye end) and slip the film strips into the right side of the mount so they push the rear of the scope over to the left hand side of the mount (as you look at

...left set it to the center and change the scope mounts or pack out the scope mount with some strips of 35mm camera film 3 strips should do you, pack out the eye end mount on the left side of the ...

directions for mounting weaver 1inch see thur scope mounts there the same as any other mounts,,, screw then down on a wever mount and plonk your scope into them,,,then re-zero the scope

mounting will a 3x9x40bsa sweet17 mount on a 93r17 savage Any scope will mount on any rifle using the appropriate mount and ring combination. It shouldn't be a problem to mount it on your savage.

Have a model 882 ss 22 mag want to mount BSA 4x16 50MMS scope on it what mounts do I need Need to mount 4x16 BSA 50 mm scope need scope mounts Medium height 1"tube 9-11 mm dovetail mounts

...MOUNT SCOPE Hello, Malcolm - There are quite a few web pages with instructions on how to mount a scope on a rifle. This web page may prove ...