Questions & Answers for: motorcycle idling properly

Proper idle speed (r.p.m.'s)? I've looked in the book, but can't find a spec for the proper idle speed for my '79 Suzuki GS550L... Anybody got a clue? Thanks I dont know for sure but 1200 rpm is most ...

Proper idle setting for a VF500 interceptor?\r\n My bike tends to stall out if I keep the idle below 800 or so....I seem to have no problem at 1000rpm. What are the specs for this? Any problem w/ idle

...Also if the tuning of the idling air/fuel mixture is not set right the enigne will not idle properly. You wil need to get the carburator tuned properly after cleaning and correcting the choke

...properly. 2. Fuel filter clogged. 3. Fuel line pinched or kinked. 4. Float needle and seat sticking. 5. Float level too low. 6. Carburetor bowl vent line clogged/blocked/pinched. 7. Idle adjusting ...

2008 wr250x rapid idle at running temperature The idle should be set when the engine is at running temp. Consult a manual for proper idle RPM and set it after the engine fully warmed up. Intake leaks ...

how do you set idle on cbr 250 when engine won't start hi there you really cant set it properly as every bike idles differently,so you should get the motor running first were you can idle the bike ...

motorcycle trouble shooting 2001 Ben1100 no spark my motorbike wount idle properly, its a 250cc import. i can get it to idle high but when i wind it back to idle normaly it stalls and its also ...

why is my bike not idleing properly and backfiring/popping? My motorbike wount idle properly, its a 250cc import. i can get it to idle high but when i wind it back to idle normaly it stalls and its ...

My zuma won't idle properly it will only idle for about 30 secs then die, also it doesn't accelerate properly, what's wrong? Sounds like a fuel problem. Check the fuel filter. Check the fuel condition

it idles fast if I turn the idle down it stalls running rich on top end at fast idle sometimes it will drop to a very low idle and shut off adjust the idle mixture screws first and then adjust the ...