Questions & Answers for: Hayward 6 l motor

changing motor hayward 1.5 HP I want to save money, how do I change the motor myself I need to change out a Norhtstar Pump 2 HP Any advice? It sounds like it is locked up and keeps tripping off. ...

i installed a new pump, motor and timer, but the i installed a new hayward pool pump, motor and intermatic timer, but the motor will not work. i have power to the motor, the timer is on, but the motor

pool motor keeps overheating and shuts off. Within seconds not minutes. It also seems to shut off just as it primes CHECK THE VOLTAGE ON THE MOTOR BY CHECKING THE 2 LINES! SEE THAT MOTOR IS SET ON THE

trying to replace motor cant figure out how to remove impeller, took 4 bolts off and seperated motor and pump but cant figure out how to seperate impeller from motor Might be a screw in middle of ...

pool motorr wont tyrn on pool motor wont tyrn on , just groans If the motor is groaning you will have to repalce the motor.

wiring diagram for emerson 1081 pool motor wiring diagram on the side of motor

pool motor leak seal replacement If you are asking how to replace shaft seal? open & dismantle pump from motor. Some will have thru bolt motors all the way thru the motor, heads of bolts are (4 ...

how do I find what bearings I need for a 1 1/2hp ust1152 motor ? cannot get bearings replace motor or pump if bearings bad probably overheated seals

opener chain not moving and motor humming It is likely the motor start capacitor has failed, especially if it gets going when the motor is turned manually.

How do I break down pool motor aol 1-1/2 hp Dismantle to Components It depends which pump you have, on hayward super II you shut off the breaker, remove the rear motor cover, disconnect the electrical