monitor will not display - when switched off and on again it say auto detect - entering power save It is not detecting a signal from your computer. This means your video card is not sending an image. ...
...monitor shows auto detect then enters power save mode and won't come back up! If your monitor it's good the reason may be that the settings of the refresh rate is to high for your monitor. Try to ...
...Auto Run. If you can hear audio, it means the computer is running ok.d. Find a different power supply outlet (or power strip) for the monitor and computer and try to reboot the computer again.e. If ...
monitor says 'auto detect, entering power save mode' and then goes black, moving cursor or buttons doesn't help This is usually not a monitor problem. You have to start trouble shooting with ...
...power provided by a test bettery out of the vehicle, and saving the customer some $$$ :thumbsup: GM has also released a remote air intake kit that includes a longer 5/8" hose, a control solenoid, and ...
Question about 2002 S-10
...it, plus you can always hit the Auto set feature on the monitor after booting the PC completely. ( I think the time out for the monitor to enter power saving mode is only 10 secs). Hope this
...dell optiplex 760 entering auto detect power save input analog Hi, You can try reseating Monitor Cable on both ends. Test Monitor on another Tower/Desktop PC? Vice Versa. Let me know if it ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions