Questions & Answers for: mixture basics

Question about De Luxe Hand Mixer

2 Answers

recipe exactly for making basic mayonnaise in the Cooking with Bamix. The recipe did not work - the mixture curdled. Please help. I have had that problem more then once. You have to make sure your egg

Ad

I NEED TO KNOW THE GAS OIL MIXTURE FOR A HOMELITE WEED WACKER.MODEL # UT20593C the basic oil, gas mixture for a 2 stroke engine is 50 to 1

Ad

Question about De Luxe Hand Mixer

1 Answer

2 stroke mixture ratio for strimmer I have a 16'' 25cc Sovereign grass strimmer with no instuctions. What fuel mixture do I use please? The basic fuel/oil mix is 50 to 1

Question about 1996 Grand Am

2 Answers

...be the cause for the catalyst converter to clog Could be. Basically anything that makes the fuel mixture rich can contribute to the converter getting clogged by sending unburned fuel into the ...

Question about Pro 16-Inch 38 cc Anti-Vibration Chainsaw #PP3516AVX

1 Answer

...Basics to check: 1) Spark plug - brown or dark brown - OK a) is it carbon or fuel fouled b) is there spark 2) Muffler remove for inspection a) exhaust screen clean or plugged b) inspect cylinder ...

Question about 155bt Gas Backpack Leaf Blower

1 Answer

...Basics to check: 1) Spark plug - brown or dark brown - OK a) is it carbon or fuel fouled b) is there spark 2) Muffler remove for inspection a) exhaust screen clean or plugged b) inspect cylinder ...

...a lot of things, but not holding rpm's can tell you a few things. I would do a few basic air/fuel mixtures test. 1. Check fuel pressure on fuel rail 2. Check Dirty Sensors( o2, Maf, Coolant, Air ...

Question about 1998 Explorer

1 Answer

need cold setting for idle mixture screw unfortunatly with mixture settings its a bit trial and era but the best place to start is turn the mixture screw right in then back out 1 and a half turns run ...

What are mixture screw settings,wind n and how many quarter turns out? Mot Husqvarnas will run on a basic setting of one turn out on the H screw, and one and a quarter on the L screw, you will have to

...of the sensors affect performance basically all of them can examples bad map sensor messes up fuel mixture--some of the evap system same ---most of the sensors that are not for warning of breakage

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Food Mixers Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66832 Answers

john h

Level 3 Expert

29494 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

39362 Answers

Are you a Food Mixers Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...