Questions & Answers for: mixers bowls turn

the lever to start the machine the one that moves to the right to select the speeds won't move Are you sure the bowl is locked into place? If it is, also check the safety mechanism that the bowl moves

Beater rubs bottom of mixing bowl. I have a KitchenAid Ultra Power mixer, model #KSM90PSWW, age unknown. The beater sits too low and rubs the bottom of the mixing bowl. Is there a way to fix this? JOE

mixing blade gets hung up at same spot on each turn Hi SUSAN. From the symptoms you describe, it sounds like your mixer has a ?Bowl to Beater Clearance? issue. That should be pretty simple to fix. But

beater rubbing bowl there are marks in my metal bowl and the "finish" on the beater is wearing where it rubs. Can this be adjusted Although I can't find your mixer by the model number you gave me, I ...

After putting flower into mixing bowl large quanity of flower is ejected when mixer is turnon at low speed. Once it starts to mix then it's ok. Firstly, I think you mean "flour". Put in your ...

the mixing section has a gap in between it has a gap in between where it should be Do you mean the beater is not touching the bottom of the bowl? AS in there is a gap between the beater and the bottom

Drive Shaft stopped kneading dough In the middle of kneading dough my Universal Plus mixer dough hook stopped. The motor is still working. The drive shaft turns with great force when inserted by ...

...turn table has notches to hold the bowl but the bowls we have ordered do not have any place on the bottom ring to insert into the turn table? The bowl we ordered is 144700-000-000 the rotating turn ...

HOW DO I MANUALLY LOWER BOWL IF MIXER WILL NOT START? MIXER JUST STOPPED IN MID MIX AND THE BOWL IS STUCK UP AND WE CANNOT GET IT RTO START Trina you might be better off to contact Hobart or an ...

Hi! I have a kitchenaid bowl lift stand mixer model 4KP26M1XNP. The beater hits the bowl, and no adjustment of the bowl lift adjust screw will change this. Any ideas? It actually adjusts *backwards* ...