...has done this in the past and "fixed" itself after a short time, but this time it is worse and now the check engine light is on. sounds like the crank position sensor is faulty and needs to be ...
...mitsubishi galant. what could it mean? i replaced my timing belt about 5-6 months ago. when i got it back the car wouldnt run right. it stall and buck sometimes when i would give it gas. i gave it ...
...Galant GTZ, 3.0.The car would suddenly die while driving.All power was working, lights, ignition, etc.., just no motor. It seemed to happen Mostly when the car was coasting and not under ...
crank angle sensor possibly being damaged (location under lower crankshaft pulley). But more likely the timing belt was replaced one tooth off changing the cam timing just slightly enough to allow the
Mitsubishi galant 2001 was over heating , change the fan could not start, change the control box,ECU dISTRIBUTOR CRANK SENSOR, STILL DIAGNOSTIC MACHINCE READ IMMOBILIZER MALFUNCTION Hi David,Firstly, ...
...also why did you have to replace the old one? Was the old one starting the car? If you did not check the crank sensor that maybe your issue. Or the other way if you are talking about the crank
galant 2001 no spark wont start wont start, not battery, not fuel pump, no spark turns over Hi Tammy, does you vehicle have any lights lit on the Dash, check engine light etc... You need to see if you
Question about 2001 Galant
Mitsubishi Galant 2.4 I just replaced my timing belt and water pump on my vehicle & aligned my camshaft and lower cranks. Worked for awhile then it shortly gave up i thought the belts came off but
...Mitsubishi Galant will not fire, what can I do? Replaced camshaft sensor, crankshaft sensor, balancer belt, timing belt and water pump and it still will not fire...help If you have no spark then you ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions