Questions & Answers for: Compaq missing cable

...missing colors. You can check if the signal cable is good or bad by doing a continuity test using a multimeter. - Dry joints in the CRT board such as in the CRT socket pins, video pre amp and driver ...

...CABLE OR INPUT SELECT" it used to make three short consecutive beeps every minute or so. I tried disconnecting all cables and plug back CPU, monitor and mouse. The beeps were gone, but still black ...

...keyboard, mouse and power. Use the safe mode start and from the results U can figure out what is missing with the SCSI. The SCSI is an input/output device card. U probably have only one device

...missing port or do I need a new cable. This moniter has a HDVi cable but the Computer doesn't have a port for it? What or which way do I need to go? Thank You for any help you may have!!! RG Did you ...

...missing or damaged if your CD is SATA then the early SATA cables fail frequently .. usually intermittantly .. if reseating helps then replace the cable .. if its PATA (wide cable, older systems) . ...

...missing the G key) with a new keyboard & everything went fine. A couple days later, it started making random key strokes and the ] key seems to get stuck and just take over. I've reset the ...

...missing. These pins are referred to as "jumpers". Each manufacturer can have their own jumper settings. Each device should have letters indicating which pins correspond to master, slave, or cable ...

wireless drivers missing if you can plug in with ethernet cable go to manufacturers website you should be able to get drivers there

...to restore the file from floppy/cd Have an NTLDR Error Here How to Fix It How to Repair ntldr is missing press ctrl alt del to restart Error on... NTLDR is missing NTLDR is missing Fix for Windows ...

...cable. and cables are fine Possible connector issues or maybe hdd? Have you checked the bios for missing items? the bios settings maybe set to boot from network or from usb before Ide or sata and if ...