Question about EP1030/1030F CS/PRO Copier
...MINOLTA COPIER EP 2030 WHOW TO REPLACE THE EXPOUSER LAMP IN MINOLTA COPIER EP 2030 THANKS MIKE It's not very difficult. CAUTION: HIGH VOLTAGE TO LAMP! ***BE SURE TO UNPLUG MACHINE BEFORE ATTEMPTING ...
...left side and some of the text not appear i check the delivery rollers there is no proplem please help me!! If this is happening when originals are fed through the document feeder, clean the document ...
Question about DiALTA Di200 Copier
...Minolta Di251 Paper Feeder doesn't work Common problem with these models.....most likely if it sounds like it "tries" to feed you original then the feed rollers need to be cleaned. On the front left ...
left of the large original glass. Clean this glass very well with a soft cloth and glass cleaner. The line is caused by a small particle stuck to this strip of glass. Good Luck and Thank You for using
...minolta ep4000 giving black shad on one side of the paper Usually caused by either dirty optics or a bad drum cleaning blade. If you lighten the exposure control to make the copy lighter, does the ...
...left side glass this is called the **** glass i guess you have a top feeder if you place an original on the glass then do a copy you will not get the white line Also check the developer unit has an ...
Question about EP4000/5000 CS/PRO Copier
...minolta di2010/3010 If you are only getting the issue when you use the doc feeder and not when copying on the glass there is an issue with the **** glass that sits on the side of the original glass. ...
...left glass fix original left glass message where the document feeder attaches to the copier is small switch that sure pop up when the document feeder is raised and should depress when lower check ...
Question about Bizhub C452 Copier
"Original Left on Glass" when paper is put in auto feeder well a model number would help of the copier
Question about Bizhub c203 Copier
...THE GLASS Actually copier is telling the problem- Originals left on glass. That is document sensor is dirty or blocked. Hence copier is giving message. Clean sensor or refer to qualified
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions