Questions & Answers for: microwave strong door spring

...microwave door panels are held together by hidden hooks or catches that ave to be separated by a thin, strong tool such as a putty knife. I've attached a photo that should serve as a good example. ...

...strong stainless steel dinner knives. By easing one knife between the internal glass and the plastic cover I managed to spring one corner by using the other knife on the external bottom edge of the ...

microwave did not work until this pirce of plastic was reinstalled. Good luck! Sue, bless you .... thank you so much! Fishing line did the trick and it's really strong. First time the spring was a bit

...microwave from the trash heap temporarily. However, my wife came up with an even more helpful temporary 'fix': Once door is open (use thin blade message described in other messages here), tie some ...

strong and will otherwise won't get separated.Once the above is accomplished, reassembling the door is a brease. P.S.: The dual end latch may interfere somewhat with the job and can be removed for the

...microwave ovens have catches that are shaped like hooks, these hooks catch on a fixed bolt or a raise in the frame of the oven. The next time you get the oven open check these hooks to see if the ...

...microwave.  The reason the handle broke off is because the latch springs are too strong and the handle is flimsy.  They do not sell just the handle because, in my opinion, in removing the ...

...microwave there is only a timer button to turn the unit on, but does not start. Do not have a manual to find what to check first. Any ideas? This could be the upper latch in the door. Mine stopped ...

microwave door to crack and break very dangerous HELP this is very dangerous and requires fixing it is a kenmore range which would occasionally do this but is now continous it may just be as simple as