Questions & Answers for: microwave light timer going cooking

microwave light and timer work, but no cooking THe microwave clock and timer features seem to work, but there is no cooking going on. IF IT TURNS ON AND SOUNDS LIKE ITS COOKING IT IS PROBABLY THE ...

...light stays on. Even after we have cooked something the timer will go off and the fan motor continues to run. It doesn't keep cooking. Any ideas This just started happening on my Kenmore microwave ...

...light went out I think it is time for a different microwave. Sounds like you may have some bad or worn capacitors, circuit board, or relays. The system will need to be fully tested to determine ...

...Microwave suddenly stopped cooking. All of the buttons work. The lights, the fan, the timer, and even the cooking timer operate. It's just that the light goes on and the timer counts down but the ...

...does not move or the microwave does to come on but the light comes on and the timer will count down. I have cleared the microwave and unplugged it with no results. Please help. Thanks in

...timer till finished going and everything, but it does not actually cook. The display acts just like its cooking tho. I have tried turning off the circut breaker to the ovens, and also, have tried ...

...timer is counting down. If the inside light comes on when you try to cook, but the turntable and internal cooling fan do NOT, then that's a bad bottom door switch or that switch's mount. See this ...

...light comes on, but the fan doesn't come on and there is no microwave cooking. I have checked the door interlocks and they are all good. Any ideas on what could be the problem. Unit is 12 years old ...

microwave was in the middle of cooking some veggie and it simply stopped. The lights were still on, the time was still counting down, but the turntable and cooking was not happening. We let it sit for

...microwave and the light stays on when the door is shut. Is this right? if it is in cook mode --yes- if you are not cooking then --no if the answer is no get a warranty check as it could be faulty It ...