Questions & Answers for: Shure microphone pc

DISTORTION I AM USING A SHURE FINE 58 RUNNING INTO A YAHAMA MD4 WITH A 3/8 RONNING FROM THE AUXILARY SEND TO THE PC AND SONAR CAKEWALK SOFTWARE. I AM GETTING DISTORTED VOCALS AND THE NOISE IS LOUD ...

pc headset micro, I try to chat and talk to friends but no one is hearing me. I do not know what to do. maybe I nead to download stuff, I am not familiar with the Computors. Can you help? thanks check

how do i take a shure ur2 apart to replace the switch? I really need to change out the pc board connected to the on off switch. But can't figure out how to get it out... Any help would be appreciated!

need wires and how do i connected to my pc This mic requires power so you will have to get hold of a PSU to provide Phantom Power 48 Vdc ±4 Vdc positive between ground (pin1) and pins 2 and 3. ...

...microphone with a wire and an adapter to my pc, but I connected it and is not working =< so how can I make it work? Unfortunately, you haven't provided any information about the adapter that ...

...this microphone to a PC / Notebook. It can also be necessary to switch on the microphone 'boost' option in the soundmixer. Options -> Properties -> Record -> Microphone

how do I take apart a beta52a? I cant figure out how to take the mic out of the housing without breaking it Unscrew the grill and look for a plastic piece that holds the capsule in place. This plastic

Shure MX418D cardioid mics I have two MX418D/C's in the shop with the same problem - mic audio is fine; the green "Pilot" LED is not functioning - ideas? Yes, I'm a qualified tech/engineer. (I

Basically, when I connect my mic with the X2U and connect it to my computer, it keeps disconnecting and it just makes it impossible for me to record, the light just goes off if I even move the mic ...

shure beta 52 not working how do I disassemble to get to PC board Unscrew the grill, pull out the element.