Questions & Answers for: microphone 4 pin

Ad

Question about 636L Noise Canceling Microphone Microphone

1 Answer

need wiring diagram I need the wiring diagram for the Astatic 636L. Randy McCallisterrmccallister@alltel.net 4 pin- 1-shld&blue 2-white 3-red 4-black 5-pin- 1-white 2-shield 3-black 4-blue 5-red

Ad

Question about 636L Noise Canceling Microphone Microphone

1 Answer

...microphone. I had to resolder the red wire and I do not know where to resolder the yellow wire if i understand the diagram correctly for the 4 pin connection there is no place you are supposed to ...

Ad

Question about HG-M75 Microphone

3 Answers

...4-pin Cobra M75 CB Mic I have 6 wires - braided, white, yellow, red, blue, & black. Need to know color code for 4-pin connector on Cobra M75 CB Mic. The diagram I have shows Pin 1-Shield: Ground, ...

...microphone gm series wiring diagram to suit kenwood ts 450 Hi, This is the pinning of the GM-series. pin 1- Ground / shield pin 2 - Mic (audio) pin3/4 - PTT On the 450 the next; pin 1 - Mic (Audio) ...

Question about 636L Noise Canceling Microphone Microphone

1 Answer

...Ranger 2995 dx diagram Hi, You have to use 4 wires from the D-104. Pin 1 = Shield + Blue Pin 2 = Audio white Pin 3 = PTT red Pin 4 = N/C Pin 5 = N/C Pin 6 = N/C N/C = Not Connected. Good luck, ...

Question about 636L Noise Canceling Microphone Microphone

2 Answers

cb raido Hi, This must be the right pinning Pin 1 = shield / blue Pin 2 = white Pin 3 = red Pin 4 = black good luck, Gerard how do i wire my Astatic D104-M6B mic for my Yaesu FT840? Tanks for all help

Question about SLX1 Body-Pack Transmitter for Existing SLX Systems Microphone

1 Answer

pin configuration for a shure slx1 transmitter Pin 1: Shield Pin 2: 5 volts bias Pin 3: audio Pin 4: Loading resistor (connect pins 3 and 4 together when using a condenser microphone.)

Question about 545SD UNIDYNE III All Purpose Microphone with Dual Impedance Microphone

1 Answer

microphone, how do I wire an XLR connector and cable to the original Shure 4-pin connector, so that I can use this mic like any other mic? Amphenol -> XLR Pin 1 -> Pin 1 Pin 4 -> Pin 2 Pin 3

Question about 636L Noise Canceling Microphone Microphone

1 Answer

...is a used 4 pin Yaesu FT101ZD radio At transceiver: Pin 1: ground/PTT common Pin 2: mic + Pin 3: PTT NO Pin 4: not used At the mic, I think: Pin 1: shld&blue Pin 2: white Pin 3: red Pin 4: ...

4 pin ProComm microphone to work on a 5 pin microphone for a Uniden Grant XL The simplest way is to order a microphone adapter from ebay or a reputable CB shop. I have all my mics wired for standard 4

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

The Knight
The Knight

Level 3 Expert

76046 Answers

Marvin
Marvin

Level 3 Expert

84619 Answers

Are you an Audio Players & Recorders Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...