Questions & Answers for: metal cutting circular saw

...metal would either break the tile or get so hot that it would seize up and stop cutting. However, ceramic tile is not cut well with sharp blades. The wet tile saw was invented to address all these ...

us to cut off a 1"steel pipe Can i use a 13 Amp. circular saw to cut off a 1" steel pipe ? Only if you use and metal cut off blade and an insert to make it fit the shaft.

...or left-hand threads? Is there a blade lock? With any circular saw, table saw, metal cut off saw, mitre saw etc the nut always tightens against the direction of rotation and loosens the opposite ...

...heard of cutting steel with a chain saw. What works best for me has been a sawzall with a good quality steel cutting blade. The real thin metal cutting blade on a circular saw works pretty good

...saw (the flat metal part on the bottom) isn't bent. I've had this sort of thing happen on a jigsaw that needed to be tapped back into square. Check the squareness of the saw with a framing ...

...metal cutting circular saw but now it is going in reverse, any help greatly appriciated. I believe the motor is a brush style unit (only an educated guess) I would revers the wire going to the ...

Whats the best metal cutting tools to get ie dropsaw circular saw It depends what kind of metal, how thick, wide, if it is hardened, what kind of a finish you want on the cut edge, etc.

cutting woods, plastic, metal, and masonry. Circular saw is an electrical saw and it runs through electricity. There are some things in a circular saw and they are- An on/off switch A handle and upper