...mercury mountaineer? ITS QUITE A BIT OF WORK YOPU GOTTA REMOVE THE A ARM(LOOSEN)KNOCK OUT THE BALL JOINT HOLDING IT IN PLACE,UPPER AND LOWER,THE HUB BEARING NEEDS TO BE REMOVED AND THAT PRETTY MUCH ...
how to replace ball joints if they are the upper ball joints you may have to replace the whole upper control arm it will come withe a ball joint already installed.
...mountaineer that needs upper and lower ball joints i know the whole upper control arm has to be replaced how hard of a job is this? well it isn't actually if you are willing to read a chilton book or ...
...MOUNTAINEER UPPER BALL JOINTS? Upper Ball JointRemoval & InstallationBall joints on this vehicle are an integral part of the control arm. If the ball joint is defective, the entire control arm ...
...mercury mountaineer? Remove the brake caliper by removing the two bolts that connect it to the steering knuckle. Remove the lower ball joint cotter pin and retaining nut. Pry the steering knuckle up ...
...upper ball joint need to see video I guess you never used You Tube Video After Googling your automotive questions, you go to you tube You replace the upper control arm with the joint, on most ford ...
Question about 1999 Mountaineer
...Mercury Mountaineer 1999 Here's a YouTube video showing the procedure on the passenger side. Apparently, you can't get just the upper ball joint, you have to replace the upper control arm, but it ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions