Questions & Answers for: memory craft 9000 tension

...tension on janome 9000 the bobbin holder bunches up the thread and pops out of place causing the needle to go thru the bobbin hoder at the two o'clock postion. I believe it is being caused by the ...

I am getting bobbin thread pulled to top when embrodery How do I adjust the tension and can I adjust the speed when I embroidery. I have lots of trouble with thread breaking. I have tried different ...

Memory Craft 9000 Several possibilities 1. The needle thread is not threaded properly. 2. The needle thread tension is too tight. 3. The needle is bent or blunt. 4. The needle is incorrectly inserted.

tension won't set If it is not working, what is the machine doing? Try re-threading the machine again, check the needle to make sure that it is in correctly. There are no set numbers for tension- it ...

...Memory Craft 6000 machine, used only a couple of times. Has been stored for many years in sewing room. I have no use for it and would like to find a home for it, along with large sewing cabinet. Any ...

bottom stich from bobbin is bunching up. Make sure you have the bobbin in the correct way round and make sure you have gone completely through the tension discs when threading the machine, make sure ...

...for a knob on the top, very near where the thread first goes into the machoine. My 9000 has a tension adjust on the touch screen, the symbol looks like a hour glass on its side, and you select ...

...memory craft 6600 the thread from the bobbin keeps looping on the top fabric? When I change the tension number it just gets worse Help Check your threading, especially your bobbin because usually ...

the tension for embroidery is way off. The only thread visible is the bobbin thread. The top thread is almost invisible. Straight stitching tension is not perfect but OK It sounds like the thread did ...

cant get the bobbin in right........... where is slot b? where is the tension spring blades? Drop the bobbin is and follow the path shown on the bobbin cover.