Question about CE-200 Quantum Futura Computerized Sewing Machine
...(just 00) on the display, my wife experienced the same problem. There was an internal sensor that was bad. The sewing machine shop repaired with a new Singer part. Part was about $20, labor was
...Sewing Machine. Brand New.Machine hums but nothing happens. Followed directions to the t. hi there, huming of motor means this will not run it could not start due to no tourque to induce voltage to ...
mean when all 7 lights on the computer speed control are blinking and the machine will not sew. Periodically and sporadically the machine starts sewing on its own without the foot pedal being pressed.
Question about CE-200 Quantum Futura Computerized Sewing Machine
...starts flashing & all lights I never had this problem until today. Sewing is not a problem, just threading the bobbin. I owned a CE-200 for about six years, and as I recall, that code blinks if ...
Question about CE-200 Quantum Futura Computerized Sewing Machine
You might be sewing material that is too heavy/thick and it's heating up the motor. It will take awhile to cool and work again. Get a heavier duty machine, this one won't last long using it as you are
Question about 7467S Confidence Stylist Electric Sewing Machine
...buttonhole function, etc. . Here are some ideas: Why does the electronic beeper beep and the sewing machine won sew Sewing... 20 Most Recent Singer 7467S Confidence Stylist Electric Sewing
Question about 7467S Confidence Stylist Electric Sewing Machine
started blinking and machine quit sewing. Turned machine off and back on and will sew short time and stop again and then wait a little while and it will sew again for a few stitches. Bad control board
Question about Artista 640E Sewing, Quilting and Embroidery Machine with Embroidery Module
...blinking the start button. I push the button on the machine and nothing happens. it's possible there could be something wrong with the computer, only a sewing machine repair shop can tell you for ...
Question about CE-200 Quantum Futura Computerized Sewing Machine
it sews about 2 inches, starts beeping sews, about 2 inches, starts beeping and sometimes EVERYTHING BLINKS AND BEEPS! This snapshot should work for you. You might need a magnifying glass to read it. ...
Question about CE-200 Quantum Futura Computerized Sewing Machine
...the red LED light blinks and sewing stops until I let off the food pedal and then restarts again only to beep again, help!!! the machine may need to be serviced, to find out what the problem
Usually answered in minutes!
760 Questions
764 Questions
564 Questions
565 Questions
372 Questions