Questions & Answers for: mcpherson strut parts

...Mcpherson Struts 1996 Buick Century I've never installed struts, but I have done a lot of mechanical work and have all the necessary tools. Should I just buy a "Chilton's" book for that year Buick ...

Ad

Question about 1993 Corolla

1 Answer

...strut housing using an impact wrench. Once both sides are changed, the car must be realigned in the front end, otherwise the car will not steer or track properly. Over all, this is a major job. These ...

Ad

...vehicle i just bought and put the wrong parts in the strut towers I need a picture of front strut assembly I bought the tool and figured it out.I also went to the wreckers and got the origional

...Mcpherson Strut assembly, your rear suspension has standard stand alone shocks, they are not air shocks. Some cars have hydro-elastic suspension systems that integrate the shock absorber function, ...

...strut only need replacing if there is alot of bounce in the car, or if there leaking, or the main reason is there broken. that would be the only reasons to replace struts Do your tires show any siggn ...

Question about 1995 4Runner

2 Answers

...Mcpherson strut all assembled it's a matter of 3 or so nuts at the top (not the center large one up top) and removing the two nuts and bolts (large) on the hub assembly. If you plan on changing the ...

...but a strut is a shock, it just has a spring on the shock instead of being counted elsewhere, it is called a coil over shock Both. Mcpherson struts front and rear. The shock forms part of the

Question about 2005 Five Hundred

3 Answers

...Strut" or "McPherson Strut" So, your vehicle's suspension is like the offspring of a standard coil spring suspension that has been "mated" with a McPherson Strut suspension. It is "kind-of" like ...

...McPherson strut to the steering knuckle (the part that turns and has the hub on it) has an offset washer on it. loosen both bolts (don't remove them) and then turn the bolt that has the offset washer ...

...McPherson strut). That may mean you might have to change the hub knuckles and several other suspension parts to get them to fit correctly. Unless you are building a serious "Off Roader" It would be ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...