Questions & Answers for: mazda sensor problems

mazda 2000 astina flat spot on take off. replaced plugs, fuel filter, coil pack, knock sensor. cant seem to fix the problem check the throttle position sensor I have seen the rotor button ...

...mazda mvp 3.0L DOHC I have check engine ligth codes MAF sensor, air temperature sensor,TPS, and lean conditions on both banks. I replace the mass air flow sensor and PCM and I steel have the problem ...

...Sensor Mazda 2001 1.6L manual trans installed new clutch kit on my 2001 Mazda Protege 1.6L manual transmission and now check engine light is on.... after checked it indicated MAP Sensor... did my ...

...Mazda Millenia 2.5L and have a check engine light on again. Before I had check engine light codes P0170 and P1522 and I bought two oxygen sensors bank 1 and bank 2 from Denso direct fit. Had a ...

Sensor 1 Signal Below 0.45v (A/F Ratio Too Lean) goodluck. Mazda Code 1131 indicates the engine is running lean. Any problems with your car? Need to check things like the condition of the air and fuel

ect sensor 2006 mazda tribute can a faulty ect sensor make my radiator fans act all weird on a 2006 mazda tribute Replace sensor and see if that fixes the problem

...Mazda 3 problems Check engine light on nothing appears wrong Yahoo... P0106 Mazda Manifold Absolute Pressure Sensor Signal Out of Range P0106 MAP Barometric Pressure Circuit Range Performance ...

...Mazda - Lack of Upstream Heated Oxygen Sensor Switch - Sensor Indicates Lean - Bank 1 Read more: http://engine-codes.com/p1131_mazda.html#ixzz393mJPSH9 This site has useful info on resolving this ...

...mazda tribute error code p 0 136 Code 136 is for a problem with the O2 sensor bank one sensor two. That is the sensor after the catalytic converter. The sensor or the wiring would need to be

...Mazda MPV 2.5liter engine mean. MAP/BARO CT rng perform code p 0106 refers to manifold absolute (MAP) sensor / barometric pressure(BARO) sensor---range performance problem===causes --intake /exhaust ...