Mazda Protege ES. Currently, it works, but I have to press the pedal all the way to the floor, with some force, to start the car. No check engine has come on. I can shift into reverse with no problem.
...floor that connects the clutch, he charged me about $150.00, then 2 days later i took it back and they said I need a new starter and charged $300.00 and gave me back the 150.00 because I complained, ...
does the mazda protege 2002 have any clutch adjust, have to push peddle all the way to the floor to shift? All hydraulic, probably slave cylinder going bad otherwise master cylinder
car will not go into gear when I push in clutch it goes straight to the floor it sounds like you have a bad clutch master or slave cylinder or both good luck, don't forget to rate me if i helped
...protege dx.I had no problems till today I pepressed the clutch pedal and it went to floor and did not come up.After looking under hood I could see where a hydraulic hose on lower driver side engine ...
...mazda protege the bite of the clutch is at the bottom just as you release the clutch it engage about a 1/2'' off the floor,if your at a red light the car will move forward sometimes ...
...mazda protege Recently had issues with getting car in gear, changed the master/slave cylinder and it worked for a while but now the clutch seems to go to floor makes the car "jump" or stick ...
...Mazda Protege it is really hard to put in any of the gears while the engine is running but while engine is off it goes in all gears fine what would be the best quickest fix should I change the master ...
Question about 1995 Protege
...Mazda Protege Doing Some VERY weird stuff when shifting or trying to. First started when at a stop had in neutral then when I went to shift the manual transmission wouldn't shift into gear. It ...
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions