...Mazda Protege alternator GO HERE. It shows the procedure for changing out the complete alternator, but the belt procedure is in there also. You don't have to remove all the stuff mentioned in the ...
...mazda protege alternator belt Need help removing the other belt. Can,t find where to loosen the other belt. so i can put on the alternator belt LOOSEN BOTTOM NUT ON POWER STEERING PUMP THEN REMOVE ...
...mazda protege? Do you have to remove the outside belt? If so how is that belt removed? JUST LOOSEN THE BOLTS OF THE POWER STEERING PUMP TAKE OUT THE BELT FOR THE PUMP THEN REPLACE THE ALTERNATOR BELT ...
...mazda protege 1.6L (Zm) Engine Refer to the illustration for component location. Loosen mounting bolts A, B and C. Loosen the adjusting bolt D and remove the belt. To install: Installation is the ...
...mazda protege 5 here is a link on how to do that ...
...mazda protige First loose the Power steering Pump and push it down,then remove the belt(This is the first belt you have to remove,. then loose the alternator that is located in the right side behind ...
...mazda protege. belts squeal all the time then break do you have a siezed tensioner pulley that could do it . remove the serpentine belt and check the idler puller, then the alt if it's siezed , the ...
...alternator from a Protege 2002. I have the belts off, the electrical connections and the main bolts removed. However I cannot get the alternator out from the bottom or top. I loosened all the hoses ...
...mazda protege Remove the cruise control diaphragm and take it out of the way to gain access from the top. Disconnect the battery negative to prevent shorts. Go in from underneath and take to finish ...
mazda protege. but cant get it out of the engine compartment, I tried getting it out from the bottom and the top but it just wont come out. how does it come out? its a tight squeeze but it'll come out
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions