Questions & Answers for: mazda mx 6 transmission problems

clutch pedal falls to the floor and stays there but not all the time i can still select gears but some times it takes a sec Hydraulic transmission? if so check your brake fluid container it should ...

Mazda Mx-6 I have a 1993 Maxda Mx-6 (v6 engine, automatic transmission) The headlights work, the turn signals work, brake lights work and the interior lights work. However, the tail lights don't work,

...mazda won't crank if it's hot and it won't go more than 65 mph, what could it be? It has a transmission problem. take it in for a scan. That should reveal the possible causes too. Rate this my 1994 ...

...mazda mx6 auto gearbox first the hold button flashed got that sorted out by cleaning the contacts of the plugs on and around the gearbox but the car still wont go into 3rd and 4th gear what could be ...

...mazda mx6 transmission is not slipping, but will not shift into higher gears. Will run at high RPM's and not shift up. Any suggestions on what it might be.. Mechanical, electrical, fluid change, 1993 ...

Mazda MX-6 Slips after tranny rebuilt I have a Mazda MX-6 and I have had my transmission replaced 3 times cause it is under warrenty but it still slips between gears. The RPMs even shoot up when I am ...

Engine dies when in forward gears but is fine in rev., neuteral or park. im taking it that this is an automatic? there is a vacum modulator on the transmission. if this canister gets a hole in the ...

1995 mazda mx6 overdrive flashing If your referring to the hold button then its a solenoid in the transmissions valve body that is going bad. The problem is going to be in the transmission.

...mazda mx-6 and for some reason it will not go in drive or reverse. anyone know why? The shifter cable could be broken, if the shifter itself goes into R or D but the car does not move it would be an ...

...mx 6 will not go into reverse, does any know what could be the problem? the car goes into drive fine but can not reverse. Any suggestions on what to do? how much would something like this be to be ...