Questions & Answers for: mazda blower resistor wiring

...blower/a/c switch on my Mazda MX5 only works on full speed. How can I fix it? Is there a relay to replace or something? Help!! Tony you need to replace the blower resistor located on the blower ...

Ad

Blower Problem Mazda B2600 96 Hey, this is my problem My Air-Con motor engages when blower setting is on 1 or 2 however the blower does not blow, however when blower setting is on 3 or 4 it disengages

Ad

...blower motor resistor on a 97 mazda protege? I think any parts store can get it for you. But if you asking for location of the component , then it's a different story. All b/m resistors(any car) ...

...blower motor resistor on 2006 Mazda5 1. The blower motor resistor is located in the upper front section of the Blower Fan Air Box at the driver's side. a. Identify/Locate: You will be able to see the ...

mazda bravo 2.5TD blower fan only works on speeds 3 and 4. Is it the resistor or the fan motor My heater blower fan only works on speeds 3 and 4. I have changed the resistor and it has made no ...

...Mazda Protege heater does not blow air, i replaced and tested blower motor, resistor and fuses inside the cab. Still nothing the A\C switch still lights up when the blower switch moves but nothing ...

mazda 6 Usually right next to the blower motor in the housing. It has 4 or 5 wires going in to it and has one or two bolts holing it in. I found the blower motor resistor. You have to remove the glove

...blower motor resistor is bad. On a Mazda, I believe that the resistor is located behind the glove box under the dash. There is a black box with a bunch of wires coming out of a little square piece ...

Question about 2001 626

1 Answer

blower motor resistor location I have a Mazda 3 2010 2.0 and the heater fan only works on high and not at all on air. Where is the resistor located and how do I get to it? Is this an easy job or not? ...

...blower motor resistor 04 Mazda 3 2.0 RESISTOR REMOVAL/INSTALLATION Disconnect the negative battery cable. Remove the two nuts securing the cooler hose (LO). Remove the following parts: Front doors ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...