...3 days ago, no change. could be the type of plug you are using.I was told only to use ngk plugs.I recently put bosch plugs in my mazda 3 and the check engine light came on and it started
...mazda 3 the trouble is troubleshooting P2404 I check for engine codes at: http://www.obd-codes.com/trouble_codes/ I couldn't find that code in the standard code list or the Mazda unique code list. ...
Question about 2004 3
...mazda 3 2004 doesnt want to start and seems like the anti theft system light stays on even if i put the key in and try to start up. What should i do? My mazda doesn't want to start at all the ...
mazda 2002 MPV cylinder 3 missfire replaced all spark plugs with bosch super platinum when i got a cylinder #3 misfire code; replaced cylinder #3 coil; continued to run ragged, got a cylinder #6 ...
...mazda and wouldnt work. Jumped it with CAA and worked drove to work (20 min drive) wouldnt start after work. Let it sit for a few days, unplugged the battery 2 days. Rehooked the battery up and it ...
...mazda 626 has misfire detected 1st 1000 revs code p0316, & 3cly misfire code p0303 runs good going down road idles rough & at take off. code p0303 refers to cyl 3 misfire detected ===causes engine ...
...advice have Mazda Tribute 2 3 2005... Problems Solutions for Mazda code u1900 Hopefully these links will work. The u1900 code is described, and there are suggestions on how to address the code
mazda code po3016 getting check engine code p03016 You did not post what type/year of Mazda you have, but the codes that start with '3' are basic Power Train Diagnostic codes.
...mazda 3 with diagnoist code u2156 what may be the problem engine not starting no spark i would suggest one of these sites: http://www.obd-codes.com/trouble_codes/mazda/ ...
2010 mazda 3 p1260 code won't start clear code Thats pointing towards the throttle body sensor.
Usually answered in minutes!
4,236 Questions
3,749 Questions
3,350 Questions
3,279 Questions
3,219 Questions
