Questions & Answers for: mazda 3 blower fan

...blower fan only works on speeds 3 and 4, but the compressor cuts off. the compressor works on 1 and 2, but the blower will not come on. any ideas ? Sounds like a bad switch. Hey I have the same ...

air conditioner blower fan stopped working.Compressor still works aith cold air but the fan will not engage. does the heat still work if not it might be your blower motor

...3, but turns off when I put it on 4 CHECK THE BLOWER MOTOR RESITER ITS OVER BY THE BLOWER FAN MOTOR HOUSING. Its the black ground wire on the ac harness directly underneath the stereo. it connects to ...

Mazda B2600 96 Hey, this is my problem My Air-Con motor engages when blower setting is on 1 or 2 however the blower does not blow, however when blower setting is on 3 or 4 it disengages and the blower

Mazda MPV heater fan works for option 4 not for 1 2 or 3. How can I fix it? Thanks You need to replace the blower motor resistor,it's in the heater box.Number 4 bypasses the resistor and all the other

The heater blower doesn't work on 1, 2 or 3. The intertubes say it is a fan blower resistor, but I don't work on cars much and don't know where that is. passenger side under glove compartment

heater fan switch has a delay coming on after car is running for awhile fan will come on sounds like you need to replace your blower motor resistor.

...Mazda MPV. The problem I have is with the A/C and the blower. The blower rotary switch setting is as follows: 0,1,2,3,4. The A/C switch is a button type with a green LED. With the engine in idle, and ...

mazda bravo 2.5TD blower fan only works on speeds 3 and 4. Is it the resistor or the fan motor My heater blower fan only works on speeds 3 and 4. I have changed the resistor and it has made no ...

...3 and 4 position and not on 1 and 2 position. it is the control mogul It's not the controller. It is the blower resistor. If it were the controller, nothing would work. The control module is were you ...