...Neptune. I hate to say it, but your view of Maytag wont be any better after this discussion. Sounds like both issues are computer board related. Either the motor control board or the console control ...
Question about Neptune MAH5500B Front Load Washer
...Neptune MAH5500B) Can't start a load of wash. All other control panel lights work fine. Is this a circuit board issue? Possibly the main control board, or maybe the touchpad. Take the back off of the ...
...Neptune Washer won't even light up. Washer was not in use at the time. Checked the breaker and outlet and all live and functioning. Is there a reset button that will reset the washer display and make ...
Question about Neptune MAH5500B Front Load Washer
maytag neptune washer MAH-1 start button turns off, does not spin Start buttons lights up then turns off. If I hold button I can get water to come in and drain out but will not spin. Two months ago ...
Question about Neptune MAH5500B Front Load Washer
Maytag Neptune; power on but won't start to wash all lights on; looks like about 3 inches of water in the washer...not normal. Almost like it stopped or is stuck mid-cycle and not drained. When you ...
Question about Neptune MDG5500AW Gas Dryer
maytag neptune gas dryer how do I remove the front panel of a maytag neptune gas dryer model # MDG9700AWW to change out the orifice Removal of the front panel requires the removal of the top cover and
Question about Neptune FAV6800AW Top Load Washer
...neptune washer is stuck in pause mode I can't s... My neptune washer is stuck in pause mode I can't set it any any wash mode to wash a load the start/pause light just keeps blinking. Is there any way ...
Question about Neptune FAV6800AW Top Load Washer
...Maytag Neptune TL FAV6800aww keeps cutting on and off. When it goes off, I can't turn it back on. It will eventually go back on by itself. All lights on control panel go off, no code warning either. ...
washer finally stopped working on OP code,Touch pad lights go blinking intermittently and all light up dimmly at times,now it's stuck on OP and lid is locked! any suggestions? This could be a Control ...
Maytag Neptune TL FAV6800AWW Washer stopped during spin cycle, lid locked, no lights, LCD is black. Appeared totally dead. There is 110v power at the wall outlet, and 110v power going into the pin on ...
Usually answered in minutes!
9,125 Questions
3,839 Questions
3,158 Questions
2,979 Questions
2,660 Questions