Questions & Answers for: maytag legacy series washer spin

...it. It also leaks at the bottom of the tub where the shaft goes into the tub.Please help. buy a new washer .specifically a direct drive whirlpool,no belt. maytag washers are not what they use to

Maytag Legacy washer MAV408DAWW loud noise, dumped all water Maytag Legacy series washer MAV408DAWW was making a loud sound while spinning, before I got to scheduling a repair. It dumped an entire ...

...during aggitation and spin cycles i have a legacy series washer model # mav208dawn that's making an awful ratcheting noise during aggitation and spin cycles rachet device under agitator is

...maytag legacy series, toploading washer. It does fine, until it spins...a very loud screaching sound. Could this be a belt? most likely your problem is in the pump either the pump itself is bad or ...

maytag legacy series is making a squeeking (sp?) noise during the wash cycle...does not make the banging noise during spin cycle...although it did for a while but not anymore. check idler pully

...Maytag Legacy washer doesn't always spin and drain. Sometimes I can move the wash setting dial and get it to drain and rinse. Sometimes it takes several attempts to get it to drai My 7 year old ...

washer tub after the spin cycle, so it seems to be draining. The Maytag repair man said it could be the timer has it in the delicate cycle & not letting into the fast spin cycle. He said the timer

my mav208daww legacy series washer doesnt spin fast enough and i have changed the belt and the pulley bearing kit pleaase help if its an induchion motor change capasator

Maytag legacy series washer I have Maytag washer heavyduty commercial quality/oversize capacity plus/lifetime tub/quiet plus/4speed select/710 rpm/24 cycles..legacy series It drained the water but I ...

My Maytag 3000 series front loader washer is not spinning properly it does spin some but nOT FAST OR HARD ENOUGH TO REMOVE a all water why? Defective drain pump