Questions & Answers for: maytag gas oven stopped working

...Maytag model PGR4410CDW stove, the oven stop working. The range top still works and the igniter in the oven still working because you can see it glowing bright. In many cases, even if the igniter is ...

Maytag gas oven The oven stopped working after a recent power outage, it doesn't do anything. Although the broiler does work. Any suggestions?? if your clock and broiler work then you need to replace ...

...MAYTAG MGR5729ADQ GAS RANGE :It first did not heat up to temp, then sometime it worked. When it was not heating up, it was not getting enough gas, then it stop coming on at all, so I replace the oven ...

...maytag gas double oven repair problem.... the lower oven wont turn on at all, tried almost everything.... tried turning to "clean", the doors lock & lite action takes place but no gas and no fire ...

Maytag gas oven quit working Starting element for oven works, but gas never turns on. All other functions work properly, including the broiler. Electrical problem with opening the gas value, or the ...

Oven Stopped Working.. I have a Maytag Model# MGR5750ADW where the top burners and the broiler both work fine. The self cleaning part and the bake functions do not. We push either of them and the red ...

...stopped working recently. The oven itself works, but the broiler flames are not lighting. I'm thinking it might be a pilot problem. Hi, The ignitor is not working right and is going bad.... have the ...

...Maytag performa Kitchen stove and all 4 burners on the top of the stove stopped working at the same time. Oven works fine... Problem? is it gas? if it is gas i would strongly suspect the spark module ...

maytag Stove Model# mgr5729adw oven stopped working and just before it did smelled gas. ignitor looks to be good no cracks. Ignitor looks to be good in heating business so know what bad ones look like

Maytag Gemini gas range. The convection fan as stopped working. I have connected the fan to 120v. It worked. Is there another test for a controller? Not that you can do at home, I would just replace ...