Questions & Answers for: maxim seat removal

Question about 1985 XJ 700 X Maxim

1 Answer

oil in intake? i noticed an oil leak coming from a tube under the bike. i then removed my seat to notice oil in my air intake. i mean a nice little puddle in front of the air cleaner. sounds like blow

Ad

...maxim plz visit this site www.xjbikes.com theres a lot of info there! My bike is xj750A ' 81 Take the seat off,the tank, there is a nut near the front of where the seat would mount.loosen it and pull ...

Ad

steps for an oil change on this bike 1986 yamaha Steps for an oil change on this bike 1986 yamaha maxim 700 Put your bike on the center stand. Inbetween your exhaust there is a bolt on the underside. ...

Question about 1985 XJ 700 X Maxim

1 Answer

...Maxim X easily. But I want to know how I can tell if my carbs are NOT cleaned properly. If it's cold, I can't even jump start it. I replaced the needles and seat, but not the jets. Could a have a jet ...

maxim xj650, but i can't figure out how to. help please? remove the hoses from petcock...remove seat then you'll see one or two bolts on rear of tank....remove them....pull the tank backwards and then

flots are sticking on my bike. how to i get them to unstick. I'm leaking gas every time I start my bike up and it wont stay running You will have to remove the carbs, and dismantle the float chamber, ...

Question about 1985 XJ 700 S Maxim

1 Answer

...seat from a 1985 Yamaha Maxim XJ700S I have a maxim x 750. If it's similar, then look for a seat lock on the right side (facing forwards). I thought it was the helmet lock but that is on the left ...

Question about 1985 XJ 700 S Maxim

1 Answer

...seat (and charge the battery) on a 1980 650 maxim yamaha As you know, your battery is located under the seat. You will find a couple bolts holding the seat down - remove them. The seat will come off ...

Question about 1982 XJ 650

1 Answer

...maxim-700-xj700n-fuel-tank/o/m146981sch211741 Remove one bolt, center back, under front of seat (remove seat first) Slightly lift back of tank, and slide rearward, off rubber dampers attached to each ...

Where is air filter located?? Also, what is plug gap setting for NGK plugs for this bike?? NGK BP8ES or equivalent with a gap of 0.7~0.8mm (0.028~0.031in). This might sound crude but the air filters ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Motorcycles Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Brad Brown

Level 3 Expert

19187 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

66963 Answers

Are you a Motorcycles Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...