tv needs replacement part I heard a popping noise in the TV when I was Watching It. I had a TV Repair Guy out to take look at it and he said that the part that was damaged is 6871QYH953A-B. He is from
...Maxent and he would personally see that the form was sent out today! Rick also stated that the replacement TV would be shipped out tuesday or wednesday and that I would have to pay for the return ...
...Maxent LCT TV I have customer call for service on this Maxent LCD TV model ML-3251HLT the set can be turned on and only have brghtness on the screen but no any displace about on screen displace or ...
...WWW. maxentusa.com. Sounds like your power supply board is bad or you have a shorted board somewhere. Maxent is still in business and they are pretty good at customer service. phone
Question about PME-42V3 42 in. Plasma Television
...maxent 42" plasma tv to program my dish network remote to operate tv.. I hope that you have gotten this resolved, but if not, or if you have any other questions, here are the codes and some simple ...
...Maxent web site , or service site ,or home page ,,, no luck , is this thing a mystery brand Yes,this brand just only show up the last 2 years.Read ur owner manual,should have a 1-800... phone numbers ...
...Maxent MX-5020HPM We do not have any codes listed for that TV brand, try the steps below for a Power Scan this should resolve the issue. Power Scan 1.) Hold down the clear "TV" button on the remote ...
Need Dish Network Remote Code We do not have any codes listed for that TV brand, try the steps below for a Power Scan this should resolve the issue. Power Scan 1.) Hold down the clear "TV" button on ...
...Maxent televisions. The best method for programming this remote is called a Power Scan, the steps are below: Power Scan 1.) Hold down the clear "TV" button on the remote for four seconds, then press ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions