Questions & Answers for: max radio locked

...radio. To remove this volume limiter is an easy fix. All you have to do is turn the volume down to 00, push and hold the volume button in for ten seconds until the unit beeps, than you can turn the ...

...max before the next step 3. Press the AM/FM button. The radio display changes to another three-digit number. Write this number to the right of the first one. 4. You now have a six-digit number, the ...

...Radio reads "LOCKED" The serial number for this radio you requested is M354958 The previous owner maxed out the number of times the code can be inputed into the unit and has gone into lock down mode. ...

...max for a couple seconds, then drop to normal. 2] no clock/radio/cd player. No radio lights. 3] no dome [map] lights 4] no keyless door lock/unlock Should I dssconnect the battery again for a few ...

...radio won't work at all. When you start the 2002 Mazda Tribute, the gauges go to max then drop down to normal. The alternator was replace recently after the car died on the side of the road. All the ...

...max how do i remove the Tape deck without breaking the dash surround. and why will all my doors unlock with the key but will only lock the one im using Most radio's you have to have a remover kit and ...

radio will no longer work. And they tried guessing the max amount of codes. My car has been locked for ten days and every time i hit a button it just says error. Is there anyway I could reset it? talk

...radio with volume up to the max consume more amps than the fuse is set to for the original radio. now you have to look into the fuse boxes and replace the fuse, this will sort out the radio and the ...

...Max 7700. My player is lock after change of batteries. Serial number 0021162. Please help if can. Thanks For clarion radio codes emailed to you follow this link: Car radio codes in Uxbridge London ...

...Max. My locks unlock and lock themselves. Now my battery is dead. Is this from the relay in the compartment under the radio on the passenger side? Or do I need to replace the switch.? No relays ...