Questions & Answers for: masonry

Masonry Jointer Usage How Should I Use a Masonry Jointer? While the final effects of a stone or concrete wall are stunning, the work to make it beautiful is time-consuming and difficult. Tools are ...

need a wiring schematic for a dual voltage masonry saw motor. it s a baldor motor on a target saw http://us.husqvarnacp.com/ drop down menu "service" click "service literature" click "old target, ...

ID=7 Required Tools: Drill, Wrench, 7/16" (11.0mm) bit, for wood anchoring: 9/32" (7.20mm) bit, for masonry anchoring: 3/8" (9.5Omm) masonry drill bit. The steps are as follows: 1. Tip the safe on its

...1980. It has been a reliable tool for numerous home projects over the years. I recently put a masonry blade in it to cut landscaping stones. It worked fine at first, then the blade started ...

...the concrete nails I bought will not go through the concrete floor, the nails keep bending. With a masonry drill bit, drill a hole that will fit a masonry anchor then screw it into the anchor. Nails ...

what store carry this product? where can I purchase this product It is listed on Amazon.com as available - Loctite PL Polyurethane Concrete Crack Masonry Sealant

I purchased a Black & Decker DR260B drill to drill masonry but there's no info in manual about brick. Can I use this drill to drill holes in brick mortar? This corded drill has enough power to ...

The instruction manual says to insert a drill bit all the way but small drill bits, such as my 3mm masonry bit are to short to do that and still function. Then when I use the hammer drill function, t ...

...your question. If inside the house the best way is to chase it into the wall - cut a trench in the masonry and hide the wire with new plaster. The other options are to use preformed plastic