manual choke seemed not to fully operate. Today started bike and it revved high, then very high. Shut bike down and cable was very loose. I can move choke by hand on carbs and turn metal piece counter
...choke cable down to the intake and see where the bracket is holding it, make sure it is adjusted correctly so when off there is no play. See if there is a spring on the choke, if there is you might ...
...choke conversion to manual kit for v6 3.0 ltr ford and unfortunately there is no paper work in showing proper installation. i have fitted it together but for sum reason it works in reverse when ...
...choke cable, try pulling the cable with your hand, if it comes all the way out, you will be needing a new cable. 2. If the plungers are stuck, this is a very time consuming job and I would suggest a ...
...choke cable inside the outer cable housing and try to get it lubricated white WD-40 or white lith gease. spary everything at the chole area with WD-40 OUTSIDE only - operate the choke manually and ...
...CHOKE CABLE. HELP? Hi, David for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero ...
...choke cable and manually operate the choke lever until you are able to replace the cable. Depending on the severity of the bend in the cable, you may also be able to straighten the cable housing out ...
Question about 1999 VS 1400 Intruder
...Good luck and have a nice day. Suzuki Intruder Throttle Choke Cables eBay Replacing your Choke cable on GSX600 Suzuki Intruder VS1400 Service Manual OEM parts for Suzuki Suzuki VS1400 Owner ...
...information I have provided. If you are having difficulty connecting the choke on your motorcycle, it is always best to consult a service manual or a wiring diagram specific to your make and
Usually answered in minutes!
652 Questions
681 Questions
595 Questions
586 Questions
644 Questions