Questions & Answers for: manual 5 singer presser foot

...Manual. 1. Select one of buttonhole patterns. 2. Replace the presser foot with the buttonhole foot. (Install presser foot with little red mark towards the front) 3. Insert the button into the ...

...through the quilt sandwich. I had the same problem....it wasn't the tension. I did not pull the thread through the proper slot in the bobbin. See step #5 on page 18 of the manual for the singer

...5 or something in the middle. Raise the presser foot and pull the thread through the tension. It should pull easily!! Lower the presser foot and pull the thread. It should pull noticeably harder.) If ...

manual to know how to set tension. Singer Sewing machine Mod.#5932 Serial#N319411147 Singer Machines are probably the easiest to set.. first thing you need to do is remove the thread.. Set you tension

manual precisely: Step 1: Raise the presser foot lever. This automatically opens the toptension disks so you can get the thread between them when you thread themachine. Step 2: Re-thread from scratch,

...manual except loosening the bobbin. Don't know how. I don't have the felt piece that should go under the spool of thread on the top of the machine and didn't know if that was part of the ...

...manual.2.the presser foot may not be installed properly3.use the correct needle for the type of fabric you are working with. To fine of needle on heavy fabric or to course a needle on silk or jersey ...

...5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew 6. the threads were not drawn to the rear after sewing 7. The thread is either to heavy or to fine ...

...5.  Through the take up lever. 6. Down through the thread guide. 7.  Down through the needle bar thread guide. 8.  Through the needle.  Hope that helps.  I found a free ...

manual. It is inexpensive, and I saw several for sale on eBay. For your purposes, it is helpful when trying to locate the particular fastener that governs the presser foot, and there's a drawing of it