Questions & Answers for: male fingers

sound in spninning cycle on whirlpool ultimate care 2 my whasing machine start making sound in the spin cycle. Spring and level is ok. what,s wrong ? if its maling a loud rumbbling sound when it goes ...

how to test a Amplifiers if it still works Connect a male to male phono lead to the amp input. Turn it on and place a moist finger on centre pin of each channel. If the amp is working you will get a ...

how test my Amplifiers if it still works Connect a male to male phono lead to the amp input. Turn it on and place a moist finger on centre pin of each channel. If the amp is working you will get a hum

...all kinds. First get some teflon thread tape, for applying 2 or 3 tightly wrapped turns around the male threaded quick-disconnect adapters, threaded end on your air hose and compressor before ...

...HK195 speakers to a Emachine C6535. I have been given a pair of the above speakers. They have the male jack that goes to the computer, however, the speakers (sound program is realtek) that came

...check that. Usually you will find a rubber plug in the cover or a access port in the housing with a male or female 1/2" wrench attachment provision. (basically a pipe plug) Always check on level ...

...luck Using the right fitting from the compressor will help you. Starting from compressor attach a female fitting then attach the male fitting to the hose run about 4 mtrs of hose then attach a female ...

...fingers from the formed male tube end. Pull male and female fittings apart. Remove the tool from the disconnected fitting. Inspect the fitting for any internal parts that may have been damaged. Fuel ...

What is the difference between male and female baseball gloves? The only real difference is that gloves for women have thinner finger holes.

i bought a set of pc stereo speakers, and plugged in the male adapter to my computer, but I get no sound. please help me These are amplified speakers, They must have a power supply. The speakers must ...