Questions & Answers for: malber wd1000 drying

Ad

Question about WD1000 Front Load Washer/Dryer

1 Answer

drying cycle malfunction water pours into the drum when the dry cycle begins, soaking the clothes that have been spun dry. Unplug the dryer and replug back up again. Put on wash /let it go thru the ...

Ad

Question about WD1000 Front Load Washer/Dryer

1 Answer

malber wd1000 hi..does anyone know what settings to use on the three dials for a regukar wash and dry load??? Two of the dials are dryer settings. There is only one washer dial, which basically ...

Ad

Question about WD1000 Front Load Washer/Dryer

1 Answer

Malber WD 1000 dryer help... I just moved into a place with a Malber WD 1000 and read your instructions post and found it very helpful. I wanted to thank you and ask one additional question.... Once ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

Malber WD 1000 takes four plus hours to dry one load my malber wd 1000 doesn't dry very well. It takes at least two 120 minute dryer cycles to dry, and often more. What to do? i would check the ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

Malber WD1000 in my tennants apt. I bought it used on Craig's list. It seems to be working fine, moving through the cycles and draining after each one. The tenant says, however, that when they turn it

Question about WD1000 Front Load Washer/Dryer

2 Answers

Malber WD1000 over floas and does not dry = can you advise me First off, I have found that my machine gets clothes 90% dry (or 75%). Also, when I first installed mine, I did not properly drain it. The

Question about WD1000 Front Load Washer/Dryer

1 Answer

No heat during drying cycle! Our unit goes through the entire drying cycle, but has no heat, so the clothes don't dry. check the heater circuit

Question about WD1000 Front Load Washer/Dryer

1 Answer

malber wd 1000 just stopped working (power light won't go on) After a full wash and dry cycle the towels were still damp (started yesterday afternoon) was set to go through another dry cycle and it ...

Question about WD1000 Front Load Washer/Dryer

2 Answers

...Some models of the Malber wd1000 you need to remove half of a full load and then hit the half load button. The condensing dry cycle will come on then. I don't find that it gets the clothes very

Malber WD1000 wont condense the water that is fed through during the drying cycle About two pints is left in the WD1000 both at the beginning and at the end of any drying cycle. Unit only dries if ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...