Questions & Answers for: malber machine spin problems

Ad

Question about WD1000 Front Load Washer/Dryer

2 Answers

...spun out water. help please. Might be a control board problem. Contact Malber USA at 1-800-600-8913. They will have replacement part and, if the machine is still under warranty, the part is

Ad

Question about WD1000 Front Load Washer/Dryer

1 Answer

...that problem, but is it possible that the machine becomes unbalanced with the spinning load and then aborts the spin, so it doesn't finish? Has the machine been properly leveled during

Ad

Question about WD1000 Front Load Washer/Dryer

1 Answer

MALBER WD 1000 - UNSPUN HERO Hello to all, REGULAR washloads spin on HIGH (900rpm or higher) and is #4 option on cycle knob (far right next to power light). I use this when I wash my delicates BY HAND

Question about WD1000 Front Load Washer/Dryer

1 Answer

...spin Malber WD1000 front load Everything else works. It turns on and seems like it's going to wash but doesn't. Motor fine. Takes water o.k. Rinse o.k. Lets water out o.k. Knobs move o.k. during any ...

Question about WK61420GB Front Load Washer / Dryer

1 Answer

...machine, but I know Malber single tub machines well and this problem in the Malber machines is alost always due to a worn out heating element, similar to the heating element in an electric oven or ...

...machine serviced before. I have a Malber P21 the door was open and not turned on and it filled with water till it overflowed onto floor....any ideas? I have a Malber P21 washer on board a boat and it ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

...spin the machine's wash cycle is fine but it doesn't drain water and doesn't spin, so it is not able to change water for rinsing. It sounds as if you have a defective timer control. Try operating the ...

Question about P21 Front Load Washer

1 Answer

...machine_not_pump_or_spin If you are having problems with your front load washing machine then checkout this tip... Front Load Washing Machine not draining and or not spinning ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

Excessive vibration during spinning I have the Malber WD-1000 and it seems to vibrate a lot to the point where it physically moves around and seems to stop and reset itself when it spins. Wash cycles ...

Question about WD1000 Front Load Washer/Dryer

1 Answer

My malber wd 800 spin slowly How can fix this problem replace motor .

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Washing Machines Experts

Gerry Harvey
Gerry Harvey

Level 3 Expert

1481 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you a Washing Machines Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...