Questions & Answers for: makita angle grinder brushes

makita 5" angle grinder model 9005b? Unplug tool and then remove the brush caps and brushes, at the front of the tool are 4 screws that need to be removed after removing them you might have to pry the

...makita angle grinder is making a crackling sound I replaced the brushes, but it is still making the same sound OK one of a couple things the brushes night need seated with a stone for this purpose or ...

...makita angle grinder? Take apart the rear portion of the case -- the part the cord enters -- two halves -- screws in side -- you'll see the brushes -- they are in holders held in by springs and plug ...

...for MAKITA 9557PBX 4 Where can I find brushes for MAKITA 9557PBX 4 1/2" angle grinder The brushes for that grinder are Makita Part #194074-2. They can be found on sites like

7" makita grinder stated to smoke cleaned it all up inside put back together now it sparks alot from the brushes sounds like it needs new brushes

angle grinder eats carbon brushes I've just gone thru my 3rd makita grinder 9005B in 2 years. am i abusing them? I'm cutting rock (flagstone, ledgestone) with diamond bit blades. They work great then ...

Makita Angle Grinder not working Our Makita is making a terrible noise, the disc is spinning slower than normal and it gets hot really quickly and smoke is coming out. Just replaced the brushes and it

...Makita cordless angle grinder (new, used once) BGA452 wont go, it starts then the overload light comes on and it stops? changed battery, still happens. Obviously too late for you, but it may help ...

...angle grinder as they are totally and completely worn off angle grinder stopped working with burning smell. i opened up the tool and found that the carbon brushes were completely worn i need a new ...

...makita GA5021 angle grinder, when I go to use it it spins but not at full power and it smells like burning, I took the brushes out and the side of the brush looked slightly burnt, any ideas? replace ...