Questions & Answers for: makes gauges stop working tahoe

Question about 2003 Tahoe

1 Answer

...gauges and the windows loose power. Im thinking its only when I turn on the a/c for about 20 minutes or so because it stops working to have to turn the car off and then turn it back on. The engine ...

Ad

Question about 1996 Tahoe

3 Answers

...i guess you checked that but from your description i cannot assume that. overfilling will make the compressor stop working, also underfilling. Maybe a leak somewhere; pressure would go to

Ad

...tahoe you !must give more info! if the engine temp.gauge is not as warm as it used to be =thermostat. if temp. reading is ok, make absolutely sure the cooling system is full.it can be hartd to bleed ...

Question about 2003 Tahoe

1 Answer

My rpm gauge stopped working first Speedometer & temp gauge now too i would start by looking behind your instrument panel and make sure all the connections are tight

Question about 1995-1997 Chevy Tahoe Ignition Starter Alarm Switch

1 Answer

...tahoe will crank and cut off sometime in the am, if left for an hour it will crank and run. Hi, Improve the FixYa.com experience for everyone by voting! NOTE: In order to perform a meaningful ...

working. if it is then next step would be to have the block tested. even with a stuck thermostat it shouldn't overheat that fast. If your engine is overheating, Try this procedure: Dirt and debris

...stop working is the heat. If both of those are full than feel the hoses going to the heater core. They should both feel hot with the engine fully warmed up. If one is cold and one is hot than the ...

Question about 1997 Tahoe

1 Answer

94 chevy k15 blazer problems my oil psi gauge keeps bottoming out but runs fine so i was thinking sending unit and may as well change pump while down there and, i get this smelly white smoke out tail ...

makes a ticking sound sometimes. My gauges trip out and stop working sometimes.... If anyone can help me with any of these problems I would grately apprecitate it!! You likely have a HVAC control head

makes and models, you may be able to get cluster to do a self-test? To do that, you may need a scanner that can communicate with instrument cluster. First there is a fuse for the gauges. If it is good

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

john h

Level 3 Expert

29494 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...