Questions & Answers for: Acura TL maintenance required light

Question about 2000 TL

1 Answer

...How do I turn off the maintenance required light? Just did this on my 2000 3.2. Turn the ignition to the "on" position and hold the select and reset buttons for 10 seconds. The light should go

Ad

Question about 2003 3.2TL

1 Answer

...engine, wait approximately 15 seconds until maintenance required light stops flashing. Turn key back off. Turn on again without starting if reset is successful maintenance light will only appear

Ad

...MAINTENANCE REQUIRED LIGHT MEAN AND BRAKE LAMP LIGHT MEAN? WHEN I TURN THE CAR ON THE MAINT. REQ LIGHT BLINKS THEN STAYS ON THE WHOLE TIME THE CAR IS ON and as soon as i hit the breaks the first time ...

...maintenance required. That went on for about 2 weeks. Now the engine stays on. Hi,welcome to fix ya. That light is there to remind you its time for service . it starts out flashing then when the ...

maintenance required yellow light stays on and I have 114,800 miles on the car. Dealer recommends replacement of ALL hoses for a total of about $825.00. Don't have the money. Is there a le My Acura TL

Maintenance required light came on. How do I know what maintenance is required? Do I have to go to the expense of going to the dealership?? oil change is needed,, On my car 99 you just stick the key ...

Question about 1996 TL Series

1 Answer

...engine off.push the reset button on clock control panel for 3 seconds,then turn off ignition switch.then turn back on the ignition switch the maintenance light should be off is so.it has

Question about 2003 3.2TL

1 Answer

maintenance required light on time to simply tune it up and change oil as well as fuel filter transmission fluid ..light goes out and car runs like it should

maintenance required light will flash on, the speedometer and tachometer will go to ZERO and then everything will come back on. The car never turns off or looses engine power, is there some electrical

the maintinace required light the maintenance light will not go out Push and hold the select and rest buttons at the same time and turn the ignition switch on but not to run. Hold until light goes off

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

2000 Acura TL
2000 Acura TL

424 Questions

1999 Acura TL
1999 Acura TL

415 Questions

2004 Acura TL
2004 Acura TL

357 Questions

2003 Acura 3.2TL
2003 Acura 3.2TL

278 Questions

Manuals & User Guides

Loading...