Question about MFC 210C All-In-One InkJet Printer
maintenance mode (all lights will flash). press 7-6-4 and OK (or start-black-copy). When finished press 7-6-3 then start black copy, printer will do a power purge. Leave maintenance mode by pressing 9
...cannot fax how do i erase the memory from my printer so that i can fax first get to maintenance mode Function *2864 (do this quickly) codes ? 91 resets all but user info, ? 99 to exit service
Question about MFC 490cw Color Inkjet Multi-Function Printer
...“99” to exit the maintenance mode. Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping. All The Best: Pineworks Not ...
Question about MultiFunction Center MFC-440CN All-In-One InkJet Printer
printer is MFC-490CW and it just says "unable to print 36" what could this be? Brother Error CodesRAM clear (most models) Quickly press function * 2 8 6 4 Display should read maintenance Press 0 1 for
Question about MFC 490cw Color Inkjet Multi-Function Printer
...maintenance mode. 2. Enter 8 & 0 by using the up arrow key & SET keys. 3. Press the mono start key several times until the purge count appears on the LCD. 4. Enter 2 7 8 & 3 by using the ...
Question about MFC-490cw Color Inkjet Wireless All-in-One Printer
...maintenance mode magenta won't print. no error messages. Trying to power purge, but don't know how to get into maintance mode. Is it a new Ink Cart? If not they have a bad ...
Question about MFC 490cw Color Inkjet Multi-Function Printer
...maintenance mode by pressing the Menu/Set button, then press * 2 8 6 4 within 2 seconds. This should put you in the maintenance mode menu. Enter 80, then scroll down with the arrow down (round) key. ...
Question about MFC 490cw Color Inkjet Multi-Function Printer
maintenance mode purge without success. Is it possible to get this going again? Please notice that you will destroy the C/Y/M part of the print head because the ph needs the ink to prevent a dryout!!!
Question about MFC-490CW Color Inkjet All-in-One with Wireless Networking
...maintenance mode. release the menu button and press 01 (param init) and then press black start. The machine will do a reset and then will go back the maintenance mode. Repeat the process param init ...
Question about MFC-490CW Color Inkjet All-in-One with Wireless Networking
...maintenance mode, but depending upon the model of your printer the method of doing this will vary. For most modern Brother printers please try the following: With the printer turned on and ready to ...
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,162 Questions
2,149 Questions
1,912 Questions
