Questions & Answers for: mag one bpr40

Mag One BPR40 two way radio by Motorola to CP100 two way radio by Motorola? I already had about 8 CP100's and we just got 2 new Mag One's. Thanks. The Mag One BPR40 is dealer programmable. You

have two bpr40 need to find out the frequencys The BPR40 is a dealer programmable radio. The frequencies would need to be read out using Motorola proprietary software. The only thing you can tell from

...mag one bpr40 will not transmit. the green light is on all the time. it will receive. how do i fix this problem Green light coming on and staying on... Sadly nothing the end-user can do to alleviate ...

...mag one bpr40 uhf 450/470 will receive but will not transmit. green light is on all the time It probably has "busy channel inhibit" turned on in the menus, and the squelch is open, thus making it ...

green light stays on bpr40 If this is after programming your radio needs repaired. We see this when some BPR40s are reprogrammed. Take the radio to your local service center or send to a qualified ...

Fuse Location on Mag One BPR40 these usually use a diode for reverse polarity protection and no fuses. You will need a full schematic and probably a service manual.

Do you Know how to change the squelch setting on a Motorola BPR40? I know there are some pots under the oval sticker on the lower right hand side of chassis. Contact Motorola Solutions ...

How do you synch a set of Motorola MagOne BPR40 radios to a new set of the same radios? BPR40 radios are dealer programmable using Motorola proprietary software and cable.

Mag One BPR40 not powering My Mag One BPR40 radio does not turn on, the charge light on the charger lights up, but after 90mins+ the unit does not power on. I have switched batteries from the other ...

...Mag One BPR40 (NEW) fully charged. set to Channel 1. It will transmit but won't receive anything. I have a green light but does not turn on. This question edited for clarity. Contents of correction ...