Questions & Answers for: Toyota e machine smoke

...smoke before you took the head off, the issue is with whatever the machine shop did. Valve seals have to fit TIGHT, or oil will go down the valve stem into the intake. Take the head back to the ...

...(white smoke) will requre the removal of the engine head to replace gasket and have head face machined, The second problrm (blue/grey smoke) will require further diagnosis by a mechanic to ...

...gas cap seal and seems ok. any other suggestions ? Your best bet is a repair shop with an EVAP Smoke Machine,to quickly check for leaks. You won't see or feel anything without smoke in the

...on passenger side only---is this correct You can have a shop with an EVAP Smoke Machine, use it to fill the cabin with smoke & see if it comes out,then maybe decide if water could enter that ...

...gasket, water pump, new spark plugs. Some thing is not right here, did you get the cylinder head machined, maybe

...charcoal canister 2005 4Runner Check for Codes Use an Evap Smoke Machine & scan tool to find any leaks or failed solenoids Doubt the Canister Failed unless you continually over fill the fuel ...

smoke machine You won't find a leak without a repair shop & evap smoke machine & system diagram, unless you see a rotted hose & get lucky. You could go thru the entire system & remove

...smoke machine, I have seen one guy simply blow the smoke from a cigar into a hose that he pulled off of the manifold. 2. The second entails getting something into the leak from outside while the ...

...water went inside while washing with pressure washing machine its now misfiring and white smoke please advise what could be the cause of it? The cause could be trying to pressure wash the

...through 3 convertable tops and paid a lot of money but still the water gets in. Find a windshield shop that has a smoke machine. They can fill the car with smoke and look for there it escapes