Questions & Answers for: lr flashing Car Audio & Video

wont work, flashes LR Washer will not spin, drain, fill or anything. the timer will count down about 10 minutes then it beeps and flashes LR on the display rapoyner The "LR" error code means "locked ...

flashing and a LR appears. Have tried unplugging, restarting, etc. but nothing works. Any suggestions? Thanks! Lr means locked rotor basically you have serious problems i would call a service tech for

to look next? There is a fuse under the hood in the fuse/relay box by the driver side fender marked LR TURN that is probably blown,each corner has own fuse

Lr code on display maytag washing machine model mah5500bww is displaing an Lr code. Does this mean I have to replace the motor? it is a problem with the motor .this is confirmed. Issue Washer stops in

I have a Beltronics Vector LR. It is probably I have a Beltronics Vector LR. It is probably about 10+ years old. Now when I turn it on, in about 3 seconds, the dislay flashes on & off " ?L01 cal "

...flashing a Lr code. Is there anything we can do without calling a service? Lr = Locked Rotor. This could be a Motor Controller failure, a Control Board Failure or a Motor failure. I would start by ...

...on batteries in order to function. Use two SR-44 cells fitted with the + side towards the cover. LR-44's also work but will give slightly inaccurate meter readings. If you use slide film then

washer stops ane flashes lr what does this mean The Lr error code is for Locked Rotor. See page 13 of the Service Manual for error codes. This could be caused by a Failed Control Board, Motor ...

...flashing LR Hi Thanks for using FixYa. Lr means locked rotor, this issue occurs due to locked rotors, you'll need to check the rotor wiring and windings. If the wiring is good and windings are not ...

...Lr is flashing The LR error on your non-spinning Maytag is usually, though not always, accompanied either by a burn spot or a blown fuse on the Motor Control Board. Your going to need a service