...print server's MAC address. Next, in the Printer Name or IP Address enter the assigned IP address, example (192.168.5.3). For the Protocol select LPR. LPR Settings: Queue Name: same as ...
...LPR -S(INSERT IP ADDRESS) FOLOWED BY FILENAME OF FILE TO PRINT. Question - Do I need a -P (Print Queue Name) in the above command? If so how do I discover what the Print Queue Name is? Regds, Peter ...
Question about RangeBooster G DPR-1260 (DPR1260) Print Server
lpr which just hung the print que. I could print when the printer was connected via USB. So I compared the printer properties and the Dlink advance tab did not have a check in Enable advance printing.
...PRINT LPR byte counting enable SNMP enabled Try this and make sure your ip address is correct Do you have the print enabler? These printers have to have a special usb thumb drive type deal that ...
...LPR print queue. This can be found by searching the LPR printer database. · LaserWriter print drivers version 8.5.1 or newer · The Macintosh must have a working TCP/IP networking ...
...print Queue to "LPR" and name the LPR queue as "printer". Make sure there are no jobs int he queue when you change the port settings. I tried both solutions and still cannot print. Silverswim how did ...
Properties. Go to Ports. Click the port it is using. Configure port. Protocol must be LPR Queue name under LPR settings: type: print (small letters) Check LPR counting enabled box. Try. It should work
Question about X4270 All-In-One InkJet Printer
Print & Fax. Click on the + button to add a printer. Go to http://lpr.byu.edu/printers/. Click the desired printer. Click the Properties link on the left of the page. Select and copy the last half
...lower 25% or so of the page will print. Printer port is setup to print LPR, queue name is lp. lpr byte count is enabled. If I try to print raw, nothing at all will print. Check the print paper
Question about 8008 Laser Printer
...I have tho remove the file from the queue by hand. Is it possible to do this automatically. Ensure you use TCP/IP to print NOT AppleTalk and you should not have an issue. The LPD/LPR queue name is ...
Usually answered in minutes!
19,138 Questions
12,216 Questions
7,310 Questions
7,277 Questions
5,472 Questions